Description
J-Link ARM Emulator is a USB powered JTAG emulator interface, Jlink V8 ARM Emulator support a large number of CPU cores: ARM7 ARM9 ARM11 Cortex-M3 core, With STM32 chip. Based on a 32-bit RISC CPU,
Jlink V8 ARM Emulator J-link JTAG Emulator interface.
J-link Jlink V8 ARM Emulator supports ARM7 ARM9 ARM11 Cortex-M3 core ADS IAR STM32 Emulator JTAG interface TVS+FUSE Protection.
V8.0 V7.0 version of the improved version of the relative:
1. Improving the SWD interface circuit, the use of counterfeit JLINK V8 JTAG debug mode can be normal when debugging CORTEX-M3 core chips will not use SWD functionality
V7 hardware SWD part with the V8 not the same, if forced to switch to SWD mode, JLINK the main chip will be destroyed! JLINK V8 interface circuit using two-level converter chip, using a level converter chip will be fake V8!
2. V8.0 using two-color LED can indicate more work status, V7.0 only an LED indicator light
3. To optimize the firmware structure and function of the firmware upgrade boot loader area to move to double the size of the application area Easy to add new features;
4. Support for ARM11 better and faster than JLINK V7, is the first choice for ARM11.
Other differences:
1. J-Link V8 use AT91SAM7S64, expanding the capacity of Flash and SRAM to facilitate future upgrades;
2. J-Link V8 improves the SWD interface, an increase of driver chips, (V6 and V7 in the SWD is a direct quote from the pin to the target CPU board);
3. J-Link V8 SWD improved control methods, V7 is the I / O direct-drive, V8 with a special method, there is not effective anyway, V8's SWD velocities slower than the V7
4. J-LinkV8 have three lights, one directed USB Communications, a direct target CPU, reset state, a direct 5V output is turned on
V7 only 1 USB communication indicator
5. J-Link V8's firmware update process is not DLL, and cannot write the same as V7 Boot loader on a simple easy to crack, V8's Boot loader need to implement USB device connectivity;
J-Link emulation is SEGGER company ARM core chip to support the launch of the JTAG emulator.
With the IAR EWARM, ADS, KEIL, WINARM, Real View and other integrated development environment supports all ARM7/ARM9 core chip simulation
Through RDI interface and the integrated development environment for seamless connectivity, easy, convenient connections, Easy to learn, is learning and developing ARM best and most practical development tools.
J-Link ARM Emulator Features:
1. IAR EWARM integrated development environment seamlessly connected JTAG Emulator
2. Support all ARM7/ARM9 core chips, as well as cortex M3, including Thumb mode
3. Support for ADS, IAR, KEIL, WINARM, REALVIEW almost all of the development environment
4. Download speeds of up to ARM7: 600kB / s, ARM9: 550kB / s, through the DCC up to 800 kB / s
5. The maximum JTAG speed 12 MHz
6. Target board voltage range 1.2V-3.3V, 5V compatible
7. Auto speed recognition
8. Monitoring all JTAG signals and target board voltage
9.Fully plug and play
10. Use the USB power supply (but not the target board power supply)
11. With a USB cable and 20-core flat cable
12. Support multi-device JTAG serial connection
13. Standard 20-core JTAG emulation connector
14. Optional 14-core JTAG emulation connector
15. Optional adapter for 5V targets board
J-Link support for ARM cores:
* ARM7TDMI (Rev 1)
* ARM7TDMI (Rev 3)
* ARM7TDMI-S (Rev 4)
* ARM720T * ARM920T
* ARM926EJ-S
* ARM946E-S
* ARM966E-S
* ARM11
* Cortex-M3
Specifications
USB power supply, the whole current <50mA
USB Interface USB 2.0 full speed 12Mbps
Target board interfaces
JTAG (20P)
J-Link and target board serial data transfer speed between the 12MHz maximum
Supported target board voltage 1.2 - 3.3V, 5V compatible
Target board power supply voltage 4.5 - 5V (provided by the USB 5V)
Target board power supply current max 300mA, with overcurrent protection
Operating temperature +5 ° C ...+60 ° C
Storage temperature -20 ° C ... +65
Humidity <90%
Size (without cables): 103mm x 53mm x 27mm
Weight (without cable): 60g
EMC EN 55022, EN 55024
Supported Operating Systems
Microsoft Windows 2000
Microsoft Windows XP
Microsoft Windows XP x64
Microsoft Windows 2003
Microsoft Windows 2003 x64
Microsoft Windows Vista
Microsoft Windows Vista x64
Package List:
1x J link V8 ARM Emulator
1x USB Cable
1x Connector Cable
1x CD
Estimate shipping
Refund Policy
Our policy lasts 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange.
To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.
Several types of goods are exempt from being returned. Perishable goods such as food, flowers, newspapers or magazines cannot be returned. We also do not accept products that are intimate or sanitary goods, hazardous materials, or flammable liquids or gases.
Additional non-returnable items:
- Gift cards
- Downloadable software products
- Some health and personal care items
To complete your return, we require a receipt or proof of purchase.
Please do not send your purchase back to the manufacturer.
There are certain situations where only partial refunds are granted (if applicable)
- Book with obvious signs of use
- CD, DVD, VHS tape, software, video game, cassette tape, or vinyl record that has been opened
- Any item not in its original condition, is damaged or missing parts for reasons not due to our error
- Any item that is returned more than 30 days after delivery
Refunds (if applicable)
Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.
If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days.
Late or missing refunds (if applicable)
If you haven’t received a refund yet, first check your bank account again.
Then contact your credit card company, it may take some time before your refund is officially posted.
Next contact your bank. There is often some processing time before a refund is posted.
If you’ve done all of this and you still have not received your refund yet, please contact us at adkobd@gmail.com.
Sale items (if applicable)
Only regular priced items may be refunded, unfortunately sale items cannot be refunded.
Exchanges (if applicable)
We only replace items if they are defective or damaged. If you need to exchange it for the same item, send us an email at Myvipprogrammer@gmail.com and send your item to: ShenZhen PHONEFIX Technology Co., Ltd, MinZhi Sub-District, LongHua New Zone D503, YueTong Commercial D Building, Shenzhen, 518131 广东, 中国.
Gifts
If the item was marked as a gift when purchased and shipped directly to you, you’ll receive a gift credit for the value of your return. Once the returned item is received, a gift certificate will be mailed to you.
If the item wasn’t marked as a gift when purchased, or the gift giver had the order shipped to themselves to give to you later, we will send a refund to the gift giver and he will find out about your return.
Shipping
To return your product, you should mail your product to: ShenZhen PHONEFIX Technology Co., Ltd, MinZhi Sub-District, LongHua New Zone D503, YueTong Commercial D Building, Shenzhen, 518131 广东, 中国
You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
Depending on where you live, the time it may take for your exchanged product to reach you, may vary.