6 Most Popular Car ECU Programmers In 2022 :

Thursday 10 November, 2022 |

6 Most Popular Car ECU Programmers In 2022

by Bellin

Automotive ECU programmer is mainly used for the programming or writing of car ecu chips such as single chip microcomputer and memory, ect. A professional automotive ECU programmer can optimize performance or fix faults by editing, tuning and reprogramming automotive ECU chip data. Here we will share 5 most popular Auto ECU programmers in 2022, they are Carprog, V54 Fgtech Galletto 4 Master, KTAG, KESS V2, XPROG, CG100 PROG III ECU Programmers ECU chip tuning tool.

1. Carprog ECU Programmer

Carprog auto repair tool is specially designed for ECU, car radio, airbag, instrument panel, immobilizer repair. Universal ECU repair tool Carprog programmer with 21 adapters for EEPROM and microcontroller programming, ect. And one of the advanced functions of it is airbag reset. It supports Windows XP, WIN7, WIN8, WIN10 operation systems.

Now the Carprog programmer has 3 versions:
1. Carprog V8.21 full set.
2. Carprog V10.05 full set.
3. Carprog V10.93 full set.

2. V54 Fgtech Galletto 4 Master

Fgtech Galletto Galletto 4 Master V54 BDM-TriCore-OBD is a chip tuning tool for all cars, trucks, motorcycles, Marine, BDM MPCxx, BDM Boot Mode, checksum. This item cannot only work as FG Tech Galletto 4-Master, but can also work for BDM.

FGTech Galletto 4-Master new system developed with high-speed USB2 technology is the fastest and most secure product on the market, it is easy to install and use by anyone, and it can be used to read and write most ECUs in the market.

Fgtech Galletto 4 Master V54 0475 EU Version is unlocked version, supports online operation, adds many more and newer vehicles and ECU protocols than FW 0386, fixed all unstable problems and errors which FW 0386 had. It supports Win XP, Win7 32bit/64bit, Vista operating system.

3. KTAG ECU Programmer

K-TAG ECU bench programmer V2.23 firmware V7.020 OBD chip tuning diagnostic tool is the most complete and professional tool to read, write and clone an ECU or TCU on any vehicle. K-TAG communicates with all ECUs, you can read and write directly to the ECU microprocessor, the flash memory and the EEPROM, without opening the ECU.

K-TAG ECU programmer V2.23 V7.020 firmware new features:
1. It uses V2.23 software version, V7.020 firmware version.
2. New support ECU types: Toyota 76FXXX, PSA 17.4.4, Ford E83, VW 17.5.5 (1766), Mercedes-Benz 276ECU, Toyota 76F, and so on, at least 160 more ECU Types added
3. No tokens limitation
4. Multi-Language: English, Italian, German, French, Portuguese, Spanish
5. Support BDM Function Well, No Checksum Error
6. It supports universal famous car,truck, tractor,bike
7. Best PCB With Murata filters ( The main program and SD card file is different from ktag v6.070.

Note for OEM K-TAG: do not update the software online; do not connect to the internet when you use this software; close anti-virus software when using. use original software with this hardware.

4. KESS V2 ECU Programmer

KESS V2 Master ECU Programmer is an OBD tuning tool for ECUS and TCUS. KESS V2 5.017 programmer reads through the OBD unencrypted files and writes easily and safely the modified files. KESSv2 can be connected to cars, motorcycles, trucks, tractors and boats to read and write both the engine and the automatic transmission parameters.

KESS V2 5.017 version has no token limitation, with coverage of all major brands and protocols including K-Line, CAN, EDC17, MED17, J1850, ect. Support universal Car, Truck, Tractor, Motorcycle, support 12V/24V, English, German, Spanish, Italian, Portuguese, French, Win XP/WIN7/WIN8/WIN10 operating system.

5. XPROG ECU Programmer

XPROG ECU programmer XPROG-M With USB Dongle is a ECU Chip tuning box used for reading and deleting processes in old and new generation processors. Now Xprog ECU programmers have 3 versions: Xprog 5.55, Xprog 5.84, Xprog 6.50. V6.50 version adds new features of Orange V1.36 V850E2 series function.

XPROG-M that can crack the new version of CAS4, which can provide you with an excellent experience. Comes with USB Dongle and ECU programming tool set hard disk to make your programming more secure. Support Auth 0015 MPC5XX authorization, depending on the automatic detection of MPC5XX, M95XXX device type, flash, external flash memory and configuration memory size.

XPROG 5.55: windows XP and WIN 7 32BIT operation system.
XPROG 5.84: windows XP 32 bit OR windows 7 64 bit operating system.
XPROG V6.50: windows 7 64 bits operating system.

For All version Xprog Series: It can not update online,when windows message popped up a license entry (error), please MUST click"NO".

6. CG100 PROG ECU Programmer

CG100 Prog III Auto ECU Programmer is a powerful programming functions operating a variety of chips, repair various modules, mainly for Mileage calibration, airbag computer repair and BCM repair.

CG100 PROG III support airbag repairing, instrument calibration, car body computer repairing, car amplifier computer repair and their functions, support to operate a RENESAS, Infineon, ST,MOTOROLA, ATMEGA, NEC, AM28BL802CB and other different chips.

CG100 Prog III has standard and full version, full-featured version of CG-100 with adapter that supports writing LandRover key and BMW Key. Support BMW, Volkswagen, Bentley engine computer repairing and replacement, support for domestic MT80, MT60 engine computer repairing and replacement.

News for Monday 15 August, 2022

5 Common Mobile Phone Failures And Solutions

View all news for Monday 15 August, 2022 on one page