Monday 18 November, 2019 |

Details and Operation for BGA110 Programmer JC P11 Nand fixture

by Bellin

JC BGA110 Programmer JC P11 iPhone Nand test fixture is for iPhone XS Max,XS, X, 8P, 8 Nand programming, it's a new programmer that produced by JCID factory. JC P11 Nand test fixture attracts a wide range of users with its low price and the iPhone models it supported. More details about JC P11 programmer will be introduced here.

1. Summary (what does it for?）

- Support to modify and write BGA110 NAND SYSCFG data (NAND Flash underlying data, such as SN/BT/WIFI and others); Unbind WIFI.

- It doesn't require restoring the firmware for brand-new Nand flash, the SYSCFG data can be written directly.

- Repair the Error 35 during firmware restoring for BGA110 NAND

- Repair the DATA Error for BGA110 NAND

- Support iPhone 8/8P/X/XS/XS Max currently, free software upgrade to support 11-11Pro Max in the future

- Initiate the network charging mode, can purchase the points according to the demand, which greatly saves the equipment investment cost.



2. What iPhone models and Nand models can be supported?

-  For iPhone 8/8P/X Nand models
 

-  For iPhone XR/XS/XSMAX/iPad mini 5/iPad Air 3 Nand models
 

-  iPhone 8/8P/X Nand models that support formatting/recovering firmware
 

-  iPhone XR/XS/XSMax/iPad mini 5/iPad Air 3 Nand models that support formatting/recovering firmware
 

-  For iPhone 11/ iPhone 11 Pro/ iPhone 11 Pro Max, they will be supported in the future (2020)

3. JC P11 Nand test fixture Size
 

4. How to modify SYSCFG data (Nand underlying data)

-  Login to the JC Repair Assistant (software), press “BGA110”, then connect the iPhone to the computer, press “Obtain” to temporarily save the data to the JC Repair Assistant (the data will be deleted once you close the JC repair Assistant). Users can check SYSCFG data that have been saved on PC before by pressing “Open SYSCFG”.

-  Connect P11 to JC Repair Assistant, install driver, there will be noticed when “connected”

-  Put a new iPhone Nand flash or iPad nand flash on JC P11, choose “Unbind WIFI”, modify the information as needed, press “Modify & Confirm”, and press “Generate data”. During this operation, it requires credit points, there will be a tips column to notice for points deduction, press “yes”, then the data will be encrypted by the third-party AL server, and then write to the new Nand flash. 5 Points per time for now.

-  After operation, assemble the Nand flash to the motherboard to restore the firmware.



5. About the credit points for JC P11

-  To generate encrypted data need to adopt the third-party AI Cloud service, so the corresponding Points will be deducted after information writes, for iPhone 8-XS Max models, each operation is 5 points.

-  JC P11 will comes with 300 points, once these points have been used up, you can contact the seller to top up (recharge the credit points)



6. How to format/restore firmware freely?

-  Login to the JC Repair Assistant, press “BGA110”, connect JC P11 to the Assistant, install the driver, the Assistant will notice when the connection is successful.

-  Put the Nand flash that will need to format or restore the firmware on JC P11, choose required models, press “Format Disk” to fulfill the operation.

More information will be updated in the future.

News for Friday 15 November, 2019

• Solution: iPhone X doesn't boot after water damaged

View all news for Friday 15 November, 2019 on one page

Recent News

• Thursday 14 November, 2019
• Wednesday 13 November, 2019
• Tuesday 12 November, 2019
• Monday 11 November, 2019
• Friday 08 November, 2019

News archive