YIHUA 853AAA BGA Rework Station, China brand OEM electronics repairing machine for all kinds motherboard / repair, YIHUA 853AAA Hot Air BGA Rework Station for Personal Repair Shop: motherboard / laptop / mobile phone motherboard repair.

YIHUA 853AAA BGA rework station for personal workshop
 
Characteristic
 

Using microcomputer processor PID programmable temperature control technology.Preheating station is to use a glaze layer having a high thermal effect, Good thermal shock resistance of the ceramic as the substrate, high-quality nickel branded alloy wire once sintering.It has a high thermal effect, overall good, good thermal stability, uniform heating, high dielectric strength, clean, easy to install.
 
1.Soldering iron part using HAKKO heater, heating up rapidly, temperature stability, long service life; antistatic design to
prevent electrostatic damage to delicate SMD components.

2.The machine has a self-test function, full intelligent over-temperature, short-circuit, open circuit, overload and fault display and protection functions.

3.853AAA preheating station using the user-friendly design, the cover affixed with a high-temperature, insulated protection pads to prevent scalding operation. The stent uses magnetic induction technology, card board bracket to prevent protective pads suck hood above, can rotate 360 degrees, flexible card board, it is suitable for the circuit boards of different shapes and sizes.

4.853AAA temperature correction function-to adapt to the environmental impact, or replace the heating elements, soldering iron tips etc. spare parts caused by temperature deviation, can use this function calibration temperature. The correction  temperature range is -50 °C ~ +50 °C.

5.YIHUA 853AAA has Celsius / Fahrenheit temperature display function meet different market needs to design the temperature display mode, you can choose under customary interest.
 
Data

Voltage  AC220C±5%
Max power consumption  1270W
 
Preheating station parts
Temperature Range  50~ 300  °c or 50~400  °c /152~572 °F or 152~752 °F
Temperature Stability  ±2  °c
Display Type  LED
Area  120*120mm
 
Hot Air Reworks parts

Airflow type brushless fan spiral out wind
Air Flow ≤130L/min
Temperature Range  100  °c -480  °c /212°F ~896 °F
Temperature Stability 100  °c -480  °c /212 °F ~896 °F
Display Type  LED
Handle cable length  ≥100cm
 
Soldering Iron parts

Temperature Range 200 °c -480 °c /392°F~896 °F
Soldering iron heater Hakko heater
Solder iron holder blue Ferro-alloy iron holder
Soldering iron handle Blue iron handle
Temperature Stability ±1°c
Tip of ground voltage  <2mV
Tip ground impedance <2 ohm
Display Type  LED
Handle cable length ≥100cm
QTY  4PCS/Outer carton
Inner box size 37*35*18cm
Outer carton box size 73*40*39cm
Goods weight 5.54kg/pcs
 
General Usage
 

1.  Suitable for de-soldering and soldering BGA, SOIC, CHIP, QFP, PLCC package SMD IC, Particularly suitable for de-soldering BGA module, computer motherboard north and south bridge, all kinds of mobile phone motherboard SMT IC and LED lights.

2. Shrinking, Paint drying, adhesive removal, thawing, warming, Plastic welding etc.